English

Strongly chosen - since 1980 - STARK

STARK Road Drags TL 4500 & TL 7500

VIDEO - Attachment in operation

The STARK Road Drag TL 4500 and TL 7500 in use from back
Play Video

Looking for quality?

STARK - Strongly chosen
STARK ROAD DRAGS TL 4500 & TL 7500 1
STARK ROAD DRAGS TL 4500 & TL 7500 2
STARK ROAD DRAGS TL 4500 & TL 7500 3
STARK ROAD DRAGS TL 4500 & TL 7500 4
STARK ROAD DRAGS TL 4500 & TL 7500 5
STARK ROAD DRAGS TL 4500 & TL 7500 6
STARK ROAD DRAGS TL 4500 & TL 7500 7
STARK ROAD DRAGS TL 4500 & TL 7500 8
STARK ROAD DRAGS TL 4500 & TL 7500 9
STARK ROAD DRAGS TL 4500 & TL 7500 10
STARK ROAD DRAGS TL 4500 & TL 7500 11
STARK ROAD DRAGS TL 4500 & TL 7500 12
previous arrowprevious arrow
next arrownext arrow
STARK ROAD DRAGS TL 4500 & TL 7500 1
STARK ROAD DRAGS TL 4500 & TL 7500 2
STARK ROAD DRAGS TL 4500 & TL 7500 3
STARK ROAD DRAGS TL 4500 & TL 7500 4
STARK ROAD DRAGS TL 4500 & TL 7500 5
STARK ROAD DRAGS TL 4500 & TL 7500 6
STARK ROAD DRAGS TL 4500 & TL 7500 7
STARK ROAD DRAGS TL 4500 & TL 7500 8
STARK ROAD DRAGS TL 4500 & TL 7500 9
STARK ROAD DRAGS TL 4500 & TL 7500 10
STARK ROAD DRAGS TL 4500 & TL 7500 11
STARK ROAD DRAGS TL 4500 & TL 7500 12
previous arrow
next arrow

General information

The STARK Road Drags are designed for road shaping, removal of sets of holes and edging.

STARK Road Drags are agile thanks to the patented hydraulically turning tire pack, which also enables crab control (“CRAB STEERING”). Thanks to this, soft roads can also be cared for on the road, when it is possible to keep the base machine in the middle of the road. The swivel tire pack is also agile on narrow roads and tight bends, where the outer curve of the road can be swept with a single pull. The roadway is also easy to reverse and turn. The tire pack seals the surface of the paved road, giving a high-quality and dust-free finish.

All main blades are lifted and tilted in a single motion, making the Road Drags easy to use and precise to adjust, as well as safe when the driver can focus on driving. The Road drag can be dragged to the desired slope over the entire width of the lane with the help of a slope meter. Additional width is provided by the side blade and crab control.

STARK Road Drags make a good mark, the sand and gravel flow evenly thanks to well-designed blade angles (working speed 10… 12 km / h). The coarse spreader is at a sufficient angle and the blade is high enough to ensure good leveling of the material on the road, large support wheels ensure a smooth work pattern. Oversized hydraulic cylinders ensure precise adjustment of all blades while saving hydraulic hoses and ‑components due to low hydraulic pressure.

Thanks to the sufficient blade angles, the Road Drags are light to pull, reducing fuel consumption and enabling the use of a smaller base machine. The operating costs of the pin blades are low and the maintenance of the blades is easy because the blades rise high enough from the ground.

Safety is increased by the ease of use of the roadway and good attention lights (LED flashing lights) as well as attention-colored fender. Thanks to the fender, the Road Drags also stay clean. The optimal diameter of the tire pack gives good visibility to the surface already lined behind and at the same time the surface pressure of the tire pack is maximized.

The optional side blade enables the treatment of road edges, ie the removal of chamfers, allowing rainwater to drain into the ditch without hindrance. Radio control allows the operation of all functions (accessories) and the adequacy of the base machine’s hydraulic functions with a single controller. Hydraulic adjustment of the roughing spreader is also available, which also allows adjustment while driving.

The long life of the STARK attachment is guaranteed by the STARK service.

Product data sheet

Applicability

Applicability of road drags TL 4500 and TL 7500

Technologies

CRAB STEERING - Stark

CRAB STEERING

Hydraulic rotary packer (5 wheels) – STARK patent – compacts the loosened soil, preventing drying, dust formation and the appearance of crushed stone on the surface.

Packer hydraulic rotation function, provides high mobility of the grader on narrow dirt roads, in sharp turns and at narrow intersections. If necessary, this function can also increase the working width of the grader.

Requirements for hydraulics

Standard Equipment

Sturdy tire pack with patented turning mechanism, plastic mudguard, hydraulic height, tilt and blade adjustments, levelling wing with large support wheels, lights, tilt gauge, tool box, flat steel blades set on levelling wing, mechanical middle wing´s turn to winter use position, 1 pc hydraulic block, wired control unit. Stinger blades equipment, side wing 1800 mm (TL 7500), side wing 1220 mm (TL 4500), flat steel or stinger blades on side wings, bevel cutter, levelling wing´s hydraulic extension, support wheel hydraulics, wireless control unit, additional hydraulic blocks.

Instruction and service manual